|
Hi everyone,
I'm building my personal web site using ASP.Net and recently noticed something curious.
When publishing my project, it doesn't seem to matter if I use:
dotnet publish -c Release -o out or
dotnet publish -c Debug -o out Both commands will output (as far as I can tell) exactly the same binary. However shouldn't the release output be smaller/optimized?
Unfortunately I can't find much documentation regarding this config flag and as far as I can tell, the dotnet command is just passing it along to MSBuild which then select the proper configuration (profile?).
Does anyone know if it's supposed to work like that or am I doing something dumb?
PS: My csproj has nothing special in it as far as I can tell:
<Project Sdk="Microsoft.NET.Sdk.Web">
<PropertyGroup>
<TargetFramework>net6.0</TargetFramework>
<ImplicitUsings>enable</ImplicitUsings>
</PropertyGroup>
<ItemGroup>
<PackageReference Include="BuildBundlerMinifier" Version="3.2.449" />
<PackageReference Include="Markdig" Version="0.30.2" />
<PackageReference Include="Microsoft.AspNetCore.Diagnostics.EntityFrameworkCore" Version="6.0.7" />
<PackageReference Include="Microsoft.AspNetCore.Identity.EntityFrameworkCore" Version="6.0.7" />
<PackageReference Include="Microsoft.AspNetCore.Identity.UI" Version="6.0.7" />
<PackageReference Include="Microsoft.EntityFrameworkCore.Sqlite" Version="6.0.7" />
<PackageReference Include="Microsoft.EntityFrameworkCore.SqlServer" Version="6.0.7" />
<PackageReference Include="Microsoft.EntityFrameworkCore.Tools" Version="6.0.7">
<PrivateAssets>all</PrivateAssets>
<IncludeAssets>runtime; build; native; contentfiles; analyzers; buildtransitive</IncludeAssets>
</PackageReference>
<PackageReference Include="Microsoft.Extensions.Hosting.Systemd" Version="6.0.0" />
<PackageReference Include="Microsoft.FeatureManagement.AspNetCore" Version="2.5.1" />
<PackageReference Include="Microsoft.VisualStudio.Web.CodeGeneration.Design" Version="6.0.7" />
<PackageReference Include="Npgsql.EntityFrameworkCore.PostgreSQL" Version="6.0.5" />
<PackageReference Include="Serilog" Version="2.11.0" />
<PackageReference Include="Serilog.AspNetCore" Version="6.0.1" />
<PackageReference Include="Serilog.Sinks.Console" Version="4.0.1" />
<PackageReference Include="Serilog.Sinks.File" Version="5.0.0" />
</ItemGroup>
</Project>
|
|
|
|
|
The output is MSIL, not machine code native to your CPU. That doesn't get generated until the code is loaded and running, call JIT Compiling. The code can be optimized for the CPU being used. Whether or not there are optimizations depends on how you've written your code and the CPU you run it on.
Debug builds do not run with optimizations, but contain more debugging information that may not be in the final executables.
|
|
|
|
|
Thanks but in that case I don't understand what is the purpose of the --configuration flag?
I understand that JIT will optimize things at runtime but I was expecting the --configuration to, at least, do some sort of (even if small) optimization when compiling (a la gcc compiling C code for example) to MSIL.
Many tutorials (especially Microsoft) almost always add that flag when publishing so it must do something but I can't understand what exactly.
Quote: Debug builds do not run with optimizations, but contain more debugging information that may not be in the final executables.
Yes this is exactly what I find confusing because my debug build doesn't have (as far as I can tell) any extra debugging information. It seems to be exactly the same as the release build (using -c Release)
|
|
|
|
|
You're also assuming that your code has stuff to optimize.
|
|
|
|
|
That's actually a very good point now that you mentioned it.
I didn't consider that and assumed that an ASP.Net app would be large enough to see some optimizations but I guess the libraries used are already optimized and my code doesn't have much stuff to optimize.
|
|
|
|
|
Does anyone know of a good reference, learning book that targets vb.net and .Net Core 6? Most of the books I see are for C# and .Net core 6
|
|
|
|
|
|
It's time to lose the training wheels and convert yourself to C#. All of the same power, and more, without the verbosity.
Embrace the curly brace!
|
|
|
|
|
I belive internet is the best source.
|
|
|
|
|
I have this SQL Statement "SELECT vYear, EmpCode, VacType, DocNum, DocDate, DepCode, SecCode, vName, vStart, vEnd, vDays, LType, CUsrName, CDate, MUsrName, MDate, Result, Reson, EmpCode_Act, MngID
FROM NetVac
WHERE ('12/07/2022' BETWEEN vStart AND vEnd) AND (vYear = 2022) AND (EmpCode = 5229) AND (VacType <> 10) AND (VacType <> 15) AND (VacType <> 16) AND (VacType <> 17) AND (VacType <> 18) AND (VacType <> 19) AND
(VacType <> 20) AND (VacType <> 21) AND (VacType <> 23) AND (VacType <> 24) AND (Result <> 1) OR
(vYear = 2022) AND (EmpCode = 5229) AND (VacType <> 10) AND (VacType <> 15) AND (VacType <> 16) AND (VacType <> 17) AND (VacType <> 18) AND (VacType <> 19) AND (VacType <> 20) AND (VacType <> 21) AND
(VacType <> 23) AND (VacType <> 24) AND (Result <> 1) AND (CONVERT(DATETIME, '2022-07-13 00:00:00', 102) BETWEEN vStart AND vEnd)" and it work fine, i would like to do the same with EF but not using ADO or >,<
Can anybody help me
|
|
|
|
|
If you are using Entity Framework and you want to use BETWEEN, the standard way is to use => and<=.
|
|
|
|
|
I'd start by looking at what your SQL is trying to do and simplify it. From what I can see, your WHERE clause can be reduced to
vYear = 2022
AND EmpCode = 5229
AND NOT VacType IN (10, 15, 16, 17, 18, 19, 20, 21, 23, 24)
AND Result <> 1
AND ('12/07/2022' BETWEEN vStart AND vEnd
OR CONVERT(DATETIME, '2022-07-13 00:00:00', 102) BETWEEN vStart AND vEnd
)
I do not understand what the date ranges are for and why there are two different ways of representing dates unless your data has two sets of texts neither as real dates, in which case the comparisons are meaningless.
|
|
|
|
|
I would like to display numbers from a loop from 0 - 100 for multiples of 3 to display the number for multiples of 5 to display the number for multiples of 3 and 5 to display the number
|
|
|
|
|
|
Using asp.net I would like to display numbers from 1 to 100 for multiples of 3 display fizz for multiples of 5 display buzz for multiples of 3 and 5 display fizz buzz
|
|
|
|
|
|
Now that you're reposting the exact same non-question again, I take it you're going to fail the assignment now?
|
|
|
|
|
Hi,
I'm trying to make a document comparison viewer for web browser that feels as same as Microsoft word's 'Track Changes' and 'Compare' (options available in Review Tab).
I am already using Aspose.Words to convert every file type to docx and compare two files which gives me a redline copy merged into one single document. What i want to get is the resulting document(s) in a **side by side comparison** on UI. Also i want to give the ability to do the basic:
1. Get a summary of changes made and able to navigate as to where to changes are made in the document.(Scroll to the position of change in the document, just like Review Pane in MS word)
2. Accept and Reject those changes and download the revised document.
3. Able to compare text as well as non text related changes.
I've looked for many 3rd party tools but always end up in a limitation surrounding them, to list a few
1. GroupDocs.Comparison - Gives navigation and auto scroll but in a
merged document not in side by side view. Also, does not gives a document but a set of images.
2. Draftable - Compares only text and style, no image/tagged file
objection insertion or deletion. No option to accept or reject
changes
3. ipdf-net - No option to accept or reject changes.
4. PrizmDocs Document Compare API - No navigation to where the change is made in the document. Also no side by side comparison.
5. Litera Compare: No side by side comparison.
Where i could such 3rd party SDK that would help me achieve my objective or is there any was i could overcome the limitations i am getting from the tolls I've looked at ? The main concern is to have a navigation/mapping of change made to its position in the document and ability accept or reject those changes.
|
|
|
|
|
Don't post the same questions in multiple forums. Once is enough.
|
|
|
|
|
Hi
I am looking for some solution to call an API method inside another API. I am working on DotNet EF Core Web API project. I have implemented several Web APIs within the project....I can call some Web API Post method by defining data for the insertion....The data is inserted successfully in the respective table related to API. What I want to do is that after successful insertion of data , logging information is need to be added in some table related to other API in same project/solution.
The question is how can we pass data from first API to other to solve this ?
OR
How can we invoke Post method of other API from first API to do this?
Any Suggestion plz
Thanks
|
|
|
|
|
I would think logging of data transactions would be performed at the database level!
Never underestimate the power of human stupidity -
RAH
I'm old. I know stuff - JSOP
|
|
|
|
|
Sorry, we need to do this at Web API level. The thing is that if some record is entered, updated or deleted using some API, another record needs to be added in some table using other API at the same time
Thanks
|
|
|
|
|
Wahaj Khan wrote: Sorry, we need to do this at Web API level
That may not strictly be true though. You might think that you want to do this via Web API, but that is not the same as actually needing to do this via Web APIs.
The proposal here is not a good idea because you have introduced a transactional dependency into your API at this point. Suppose that the API that deletes the record happens successfully, and then calls the second API, which is down. What are you going to do at that point? Undelete the record?
If you are logging things happening at the database, let the database take care of the logging. Alternatively, you need to consider how to cope with failure conditions and look at techniques such as event passing, retry mechanisms, queues and the likes to see if they can help you in this situation.
Bottom line - your current design is borked if it's only relying on happy path scenarios.
|
|
|
|
|
Either create an instance of the controller class and call the action method directly, or have the API method pass the call through to another class which implements the logic, and call that from both.
"These people looked deep within my soul and assigned me a number based on the order in which I joined."
- Homer
|
|
|
|
|
Wahaj Khan wrote: The question is how can we pass data from first API to other to solve this ?
I can only suppose that you think that you are going to do this via the following
1. First API does just the main part of the functionality
2. That API exits (in some meaning of that word).
3. The log happens which invokes another API call.
Can you make that happen? Yes I believe so. It involves delving into some of the semantics of how it handles some of a Web call for you. For example you can intercept errors.
Should you do it? If there is only one method that needs this then no. Just do it in the same code that does the first functionaliy. If you want to do it with more than one API call, then start figuring out how the call flow is actually handled before it gets to your code and after it leaves your code. You should keep in mind that doing it this way ADDS complexity. That is because when something goes wrong it can interfere with stuff in unexpected ways (for example how you handle errors from the second call.)
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
